Backplate Stainless Steel

Normally ships within one week.
2.50 KGS
Calculated at Checkout

Product Overview

Greg Flanagan first invented the metal backplate using aluminum in 1979 for North Florida cave divers. He realized that a back-mounted buoyancy system gives a diver natural balance in the water, due to the diver's center of gravity (tanks) being surrounded by the center of buoyancy (BC wings). Plus, the diver gains a clean chest area with room for gear attachment points on the harness. Bill Hogarth Main went on to popularize the backplate and harness and dive purists who follow the DIR philosophy have come to embrace what is known today as the "Hogarthian Rig." Dive Rite began manufacturing backplates for the public in 1984 and pioneered 11-inch on center bolt spacing creating an industry standard that is still followed today. Northeastern wreck divers adapted the concept and began using a stainless steel backplate; at six pounds in weight, it is ideal to counterbalance buoyancy characteristics of thick drysuit
  • 5.5 lbs (2.5kg)
  • 11-inch on center holes accomodate standard bolt kits
  • Two 3/8 slots along the bottom are designed to fit assembly screws for attaching accessories.
  • Center slots accommodate cam straps without a single tank adaptor
  • One-inch and 2-inch slots permit diver's choice of crotch strap
  • Perimeter holes for mounting lights, pony bottles and lift bags
  • All edges are smooth and rounded to eliminate sharp edges and prevent abrasion to harness webbing.
Information as published on as of November 2010.