Right valves versus left valves seems to have a lot of divers confused. Training agencies coined the term right "hand" valve, which was meant to imply a valve that can be reached with the right hand when a diver reaches behind their head with the tank on the back. A "left hand" valve was deemed the opposite. Because all Dive Rite valves are modular, we call all valves with a reverse thread on the crossbar plug a "left valve." This is easily identifiable by a notch on the plug. The valves with plugs that are not-notched are "right valves." Most people find it easier just to remember that when facing a Dive Rite valve, if the hand wheel is on the left it is a left valve and if the hand wheel is on the right it is a right valve. Our Left Valves have shock absorbing ribbed rubber knobs that are rugged, yet easy to manipulate. All Dive Rite valves come standard with 3500 psi working pressurerelief disks. Our valves are modular so divers can use them independently on single tanks, put them together to form an H-valve or use an isolation bar to build a manifold for double tanks. All Dive Rite valves come with Viton o-rings and oxygen compatible lubricants and are Nitrox ready up to 40-percent.
Note: As of July 1, 2010, 300 bar single valves have been discontinued (VA3001L-300). Dive Rite will continue to offer a 300 bar manifold.
- Ribbed, rubber knobs with stainless steel inserts are tough, yet easy to open/close
- Double barrel o-ring seals provides redundancy and better shock absorption
- Brass with chrome-plated finish gives rugged protection and durability