NOTES: This gently used RX10 light has been used in fresh and salt water. The light head was fully rebuilt by Dive Rite since it's last in-water use. Everything needed is included in the package, and includes the travel case as well.
The RX10 is the next generation in the Dive Rite advanced LED lighting systems. It’s 30% brighter than its predecessor with a tight, fixed focus beam. As always, the RX brand utilizes an intelligent microprocessor control unit to keep the light operating at peak efficiency. This smart controller monitors the battery voltage, alerts the diver to low battery upon turn on and monitors temperature for device protection.
At full power, the RX10 has a seven hour burn time, however, using smart technology, the RX10’s microprocessor“thinks” for the diver and automatically switches from full power to a graduated voltage drop to extend battery run-time while maintaining usable light. A key added safety feature is the battery check function. The diver can check battery state-of-charge by simply switching the unit on. If the unit flashes three rapid pulses, the diver knows that the battery is low before the dive and will start in the half-power setting.
The RX10 employs a CREE® XLamp® LED with a system lumen rating of 750 lumens. At one meter, the RX10 boasts a LUX rating greater than 9,500 lumens. Designed for technical diving, the RX10 sports a tight 10-degree beam that is useful for signaling, yet covers enough area to illuminate the surrounding environment for better awareness as well as viewing pleasure.
The RX10 comes with an elastic hand mount, Quick Belt Mount, and banana plug power connections. The RX10 NiMH batteries do not contain lithium and therefore are not subject to TSA travel restrictions. NiMH Smart Charger comes standard with a US power cord and automatically adjusts to 110/220 volts AC and 50/60Hz frequency.
The Dive Rite RX10 is proudly designed, manufactured, and assembled in the USA.